



UniFi WiFi 7 Indoor/Outdoor Mesh Access Point
Ubiquiti UniFi U7 Mesh WiFi 7 Indoor/Outdoor Access Point
The Ubiquiti U7 Mesh is a compact indoor/outdoor WiFi 7 access point with an integrated long-range antenna system. A directional 5 GHz antenna handles the mesh backhaul while an omni antenna serves local clients at the same time. It covers up to 140 m² (1,500 ft²), supports 200+ connected devices, is IPX6 rated when installed with the outdoor mount, and ships with a PoE adapter and wall, pole and table stand mounts.
Quick Glance
Key Features
Dual-antenna mesh performance
A directional 5 GHz antenna (10 dBi) for the mesh backhaul plus an omnidirectional antenna (6 dBi on 5 GHz, 3 dBi on 2.4 GHz) for local client coverage at the same time. 2 x 2 MU-MIMO on each band, up to 4.3 Gbps on 5 GHz (BW240, depending on regulatory region) and 688 Mbps on 2.4 GHz.
Indoor or outdoor, IPX6 rated
IPX6-rated protection supports outdoor deployments when installed with the included outdoor mount. Wall, pole and table stand mounts are included, the enclosure is UV-stabilized polycarbonate, and Ubiquiti rates it for -30 to 60° C ambient operating temperature.
2.5 GbE PoE, MLO ready
One 2.5 GbE RJ45 port carries data and PoE power (13W max., 42.5-57V DC), and a PoE adapter is included. Ubiquiti lists the U7 Mesh as MLO ready: Multi-Link Operation support for improved latency and resiliency. Rated for 200+ connected devices and 140 m² (1,500 ft²).
Detailed Specifications
All specifications are Ubiquiti's own, from its official tech specs and store pages. IPX6 applies when installed with the outdoor mount. The 4.3 Gbps 5 GHz maximum (BW240) depends on the regulatory region.
Need-to-Know
- The IPX6 rating applies when the U7 Mesh is installed with the outdoor mount, as Ubiquiti states. Use that mount for any exposed outdoor position.
- A PoE adapter is included. Ubiquiti does not state the adapter's plug type or wattage, so ask us if you need it for a specific socket type.
- Ubiquiti recommends cables with shorter boots for the 2.5 GbE uplink port.
- The U7 Mesh is a dual-band 2.4/5 GHz access point; Ubiquiti lists no 6 GHz operation for it. The 4.3 Gbps 5 GHz maximum (BW240) depends on the regulatory region.
- Managing the U7 Mesh needs the UniFi Network application, version 10.1.85 or later.
Best For / Customer Benefits
Customer Benefits
- One access point for indoor or outdoor use, IPX6 rated with the outdoor mount
- Directional 5 GHz backhaul plus omni client coverage at the same time
- PoE adapter and wall, pole and table stand mounts included
- WiFi 7 with up to 4.3 Gbps on 5 GHz over a 2.5 GbE uplink
Best For
Frequently Asked Questions
Yes. Ubiquiti describes it as a compact indoor/outdoor access point with IPX6-rated protection when installed with the included outdoor mount, and rates it for -30 to 60° C ambient operating temperature and 5 to 95% noncondensing humidity.
Ubiquiti pairs a directional 5 GHz antenna (10 dBi) for the mesh backhaul with an omnidirectional antenna (6 dBi on 5 GHz) for local client coverage, so it can hold a reliable mesh link to another UniFi access point and serve nearby devices at the same time.
It is powered by PoE over its single 2.5 GbE RJ45 port, with a maximum power consumption of 13W and a supported voltage range of 42.5-57V DC. Ubiquiti states that a PoE adapter is included. It can also run from a PoE switch port.
Ubiquiti lists the U7 Mesh as MLO ready, describing it as Multi-Link Operation support for improved latency and resiliency. It is a dual-band 2.4/5 GHz WiFi 7 access point with no 6 GHz operation.
Ubiquiti lists wall, pole and table stand mounting with the mounts included, and refers to an included outdoor mount for IPX6 installation. The access point is a slim ⌀48.5 x 159.5 mm cylinder weighing 313 g.
Extending WiFi with the U7 Mesh?
Tell us where the WiFi needs to reach and where your nearest access point is, and we will help you plan the mesh link and mounting.

