
Brother P-touch Industrial Handheld Labeller
Brother PT-E560BTVP Industrial Label Printer
A handheld P-touch built around six one-touch industry keys, so a faceplate, a cable flag, a punch-down block or a patch panel label is one button press away rather than a menu. It prints genuine TZe and HGe tape up to 24 mm wide, plus the 3:1 shrink-ratio HSe heat-shrink range, and connects over USB-C or Bluetooth so it works tethered to a PC or paired to a phone on site. The rechargeable Li-ion battery, a hard carrying case and a starter tape cassette are in the box.
Quick Glance
Key Features
Six one-touch keys for cabling and panel work
Dedicated keys for general labels, faceplates, cable flags and wraps, punch-down blocks and patch panels put the right template on screen in one press, instead of hunting through a menu on a job site. Paired with the built-in barcode support, it is built for the labelling an electrician or a datacomm installer repeats all day.
TZe, HGe and 3:1 heat-shrink tape up to 24 mm
Takes genuine TZe laminated tape from 3.5 to 24 mm and HGe tape from 6 to 24 mm on the same machine. It also runs Brother's HSe heat-shrink tube at a 3:1 shrink ratio in 5.2, 9.0, 11.2 and 21.0 mm — a different sizing family from 2:1 heat-shrink stock, so check the ratio before ordering tube for this printer.
USB-C for the desk, Bluetooth for the phone
Connect over USB-C to print from a PC, or pair over Bluetooth Dual-Mode to print from a phone or tablet without carrying a cable. The rechargeable Li-ion battery, a USB-C cable and a hard carrying case are included, so it goes straight from the box to a site bag.
Detailed Specifications
Specifications are provided by the manufacturer and may be updated or changed without prior notice. AtomOffice is not responsible for any discrepancies between the information shown here and the manufacturer's official documentation.
Need-to-Know
Four handheld P-touch machines with one-touch industry keys, and what changes between them is tape width, print speed and how they connect.
- The HSe heat-shrink tube on this model uses a 3:1 shrink ratio (5.2, 9.0, 11.2 and 21.0 mm) — a different, incompatible sizing family from 2:1 heat-shrink tube. Check the ratio before ordering heat-shrink tape for this printer.
- Print speed depends on how it is powered. Brother rates the machine at up to 30 mm/sec, and its specification table separately rates battery operation at up to 20 mm/sec. Plan on the lower figure for a long run away from a socket.
- Brother's specification lists no AC adapter for this model — power comes from the included rechargeable Li-ion battery or directly over the USB-C cable.
- This is a keypad machine: it has its own QWERTY keyboard and small LCD, so it can be used standalone without a phone or PC. Bluetooth and USB-C are there for when you do want to print from a connected device.
| Model | Max tape width | Speed / resolution | Connectivity |
|---|---|---|---|
| PT-E310BTVP | 18 mm | 20 mm/sec · 180 dpi | USB-C, Bluetooth |
| PT-E550WVP | 24 mm | 30 mm/sec · 180 dpi | USB, Wi-Fi |
| PT-E560BTVP (this page) | 24 mm | 30 mm/sec · 180 dpi | USB-C, Bluetooth |
| PT-E920BT | 36 mm | 20 mm/sec · 360 dpi | USB-C, Bluetooth |
Choose the PT-E310BTVP for the smallest and lightest kit at 18 mm, the PT-E550WVP for the fastest print speed where Wi-Fi suits the site, the PT-E920BT for 36 mm and higher resolution with no keypad to carry, and the PT-E560BTVP for a 24 mm keypad machine paired with Bluetooth mobile printing.
Best For / Customer Benefits
Customer Benefits
- Six one-touch industry keys put faceplate, cable flag, punch-down block and patch panel templates one press away, so common jobs do not need a menu.
- TZe, HGe and 3:1 HSe heat-shrink tape all run on the same machine, covering flat labels and wire marking without switching printers.
- Bluetooth and USB-C mean it prints from a paired phone on site or from a PC at the bench, whichever the job calls for.
- A rechargeable battery, hard carrying case and starter tape are included, so it is ready to work straight out of the box.
Best For
Official & Recommended Options
Don't see the tape or accessory you need? Contact us — we stock the full genuine Brother TZe, HSe and DK range and can confirm what fits your machine.
Frequently Asked Questions
Genuine Brother TZe laminated tape from 3.5 to 24 mm, HGe tape from 6 to 24 mm, and HSe heat-shrink tube at a 3:1 shrink ratio in 5.2, 9.0, 11.2 and 21.0 mm. The HSe range on this machine is the 3:1 family specifically — confirm the shrink ratio with us before ordering heat-shrink tube for it.
No. It has its own QWERTY keypad and an 18-character, 3-line display, so it prints standalone on the bench or in the field. USB-C and Bluetooth are there if you would rather design labels on a connected PC or phone.
Up to 30 mm/sec at 180 dpi. Brother rates battery operation separately, at up to 20 mm/sec, so a long run on the supplied Li-ion pack will be slower than the same run on mains. For most cable and panel jobs, where you print a few labels at a time and walk, the difference is not something you would notice.
The PT-E560BTVP printer, a rechargeable Li-ion battery, a USB-C cable, one 24 mm TZe flexible ID tape cassette and a hard carrying case.
Yes. It supports CODE39, ITF 2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, GS1-128, CODE128, QR Code and Data Matrix natively, plus further 1D and 2D symbologies for templates transferred from P-touch Editor.
Ready to order the PT-E560BTVP?
Talk to our team for pricing, current stock and the right genuine TZe, HGe or HSe tape to go with it, across Dubai, Abu Dhabi and the wider UAE.

